[alacritty] initial config

alacritty/alacritty.yml

@@ -0,0 +1,496 @@
+# Configuration for Alacritty, the GPU enhanced terminal emulator.
+
+# Any items in the `env` entry below will be added as
+# environment variables. Some entries may override variables
+# set by alacritty itself.
+#env:
+  # TERM variable
+  #
+  # This value is used to set the `$TERM` environment variable for
+  # each instance of Alacritty. If it is not present, alacritty will
+  # check the local terminfo database and use 'alacritty' if it is
+  # available, otherwise 'xterm-256color' is used.
+  #
+  #TERM: xterm-256color
+
+window:
+  # Window dimensions (changes require restart)
+  #
+  # Specified in number of columns/lines, not pixels.
+  # If both are `0`, this setting is ignored.
+  dimensions:
+    columns: 80
+    lines: 24
+
+  # Window padding (changes require restart)
+  #
+  # Blank space added around the window in pixels. This padding is not scaled
+  # by DPI and the specified value is always added at both opposing sides.
+  padding:
+    x: 2
+    y: 2
+
+  # Window decorations
+  #
+  # Values for `decorations`:
+  #     - full: Borders and title bar
+  #     - none: Neither borders nor title bar
+  decorations: full
+
+scrolling:
+  # Maximum number of lines in the scrollback buffer.
+  # Specifying '0' will disable scrolling.
+  history: 10000
+
+  # Number of lines the viewport will move for every line scrolled when
+  # scrollback is enabled (history > 0).
+  multiplier: 3
+
+  # Faux Scrolling
+  #
+  # The `faux_multiplier` setting controls the number of lines the terminal
+  # should scroll when the alternate screen buffer is active. This is used
+  # to allow mouse scrolling for applications like `man`.
+  #
+  # Specifying `0` will disable faux scrolling.
+  faux_multiplier: 3
+
+  # Scroll to the bottom when new text is written to the terminal.
+  auto_scroll: false
+
+# Spaces per Tab (changes require restart)
+#
+# This setting defines the width of a tab in cells.
+#
+# Some applications, like Emacs, rely on knowing about the width of a tab.
+# To prevent unexpected behavior in these applications, it's also required to
+# change the `it` value in terminfo when altering this setting.
+tabspaces: 8
+
+# Font configuration (changes require restart)
+#
+# Important font attributes like antialiasing, subpixel aa, and hinting can be
+# controlled through fontconfig. Specifically, the following attributes should
+# have an effect:
+#   - hintstyle
+#   - antialias
+#   - lcdfilter
+#   - rgba
+#
+# For instance, if you wish to disable subpixel antialiasing, you might set the
+# rgba property to `none`. If you wish to completely disable antialiasing, you
+# can set antialias to `false`.
+#
+# Please see these resources for more information on how to use fontconfig:
+#   - https://wiki.archlinux.org/index.php/font_configuration#Fontconfig_configuration
+#   - file:///usr/share/doc/fontconfig/fontconfig-user.html
+font:
+  # Normal (roman) font face
+  normal:
+    family: "Fira Mono"
+    # The `style` can be specified to pick a specific face.
+    # style: Regular
+
+  # Bold font face
+  bold:
+    family: "Fira Mono"
+    # The `style` can be specified to pick a specific face.
+    # style: Bold
+
+  # Italic font face
+  italic:
+    family: "Fira Mono"
+    # The `style` can be specified to pick a specific face.
+    # style: Italic
+
+  # Point size
+  size: 12.0
+
+  # Offset is the extra space around each character. `offset.y` can be thought of
+  # as modifying the line spacing, and `offset.x` as modifying the letter spacing.
+  offset:
+    x: 0
+    y: 0
+
+  # Glyph offset determines the locations of the glyphs within their cells with
+  # the default being at the bottom. Increasing `x` moves the glyph to the right,
+  # increasing `y` moves the glyph upwards.
+  glyph_offset:
+    x: 0
+    y: 0
+
+  # Scale the font size based on the monitor's DPI. This will lead to bigger text on HiDPI
+  # screens and make reading text a little easier.
+  # On X11 it is possible to change the DPI for each instance of alacritty by using
+  # `WINIT_HIDPI_FACTOR=1.0 alacritty` to scale the font.
+  scale_with_dpi: true
+
+# Display the time it takes to redraw each frame.
+render_timer: false
+
+# Use custom cursor colors. If `true`, the `colors.cursor.foreground` and
+# `colors.cursor.background` colors will be used to display the cursor.
+# Otherwise the cell colors are inverted for the cursor.
+custom_cursor_colors: false
+
+# If `true`, bold text is drawn using the bright color variants.
+draw_bold_text_with_bright_colors: true
+
+# Colors (Tomorrow Night Bright)
+colors:
+  # Default colors
+  primary:
+    background: '0x2F343F'
+    foreground: '0xFFFFFF'
+
+    # Bright and dim foreground colors
+    #
+    # The dimmed foreground color is calculated automatically if it is not present.
+    # If the bright foreground color is not set, or `draw_bold_text_with_bright_colors`
+    # is `false`, the normal foreground color will be used.
+    #
+    #dim_foreground: '0x9a9a9a'
+    #bright_foreground: '0xffffff'
+
+  # Cursor colors
+  #
+  # These will only be used when the `custom_cursor_colors` field is set to `true`.
+  cursor:
+    text: '0x000000'
+    cursor: '0xffffff'
+
+  # Normal colors
+  normal:
+    black:   '0x2E3436'
+    red:     '0xEF2929'
+    green:   '0x4E9A06'
+    yellow:  '0xC4A000'
+    blue:    '0x3465A4'
+    magenta: '0x75507B'
+    cyan:    '0x06989A'
+    white:   '0xD3D7CF'
+
+  # Bright colors
+  bright:
+    black:   '0x555753'
+    red:     '0xEF6060'
+    green:   '0x8AE234'
+    yellow:  '0xFCE94F'
+    blue:    '0x729FCF'
+    magenta: '0xAD7FA8'
+    cyan:    '0x34E2E2'
+    white:   '0xEEEEEC'
+
+  # Dim colors
+  #
+  # If the dim colors are not set, they will be calculated automatically based
+  # on the `normal` colors.
+  dim:
+    black:   '0x333333'
+    red:     '0xf2777a'
+    green:   '0x99cc99'
+    yellow:  '0xffcc66'
+    blue:    '0x6699cc'
+    magenta: '0xcc99cc'
+    cyan:    '0x66cccc'
+    white:   '0xdddddd'
+
+  # Indexed Colors
+  #
+  # The indexed colors include all colors from 16 to 256.
+  # When these are not set, they're filled with sensible defaults.
+  #
+  #indexed_colors:
+  #  - { index: 16, color: '0x000000' }
+
+# Visual Bell
+#
+# Any time the BEL code is received, Alacritty "rings" the visual bell. Once
+# rung, the terminal background will be set to white and transition back to the
+# default background color. You can control the rate of this transition by
+# setting the `duration` property (represented in milliseconds). You can also
+# configure the transition function by setting the `animation` property.
+#
+# Values for `animation`:
+#   - Ease
+#   - EaseOut
+#   - EaseOutSine
+#   - EaseOutQuad
+#   - EaseOutCubic
+#   - EaseOutQuart
+#   - EaseOutQuint
+#   - EaseOutExpo
+#   - EaseOutCirc
+#   - Linear
+#
+# Specifying a `duration` of `0` will disable the visual bell.
+visual_bell:
+  animation: EaseOutExpo
+  duration: 0
+
+# Background opacity
+#
+# Window opacity as a floating point number from `0.0` to `1.0`.
+# The value `0.0` is completely transparent and `1.0` is opaque.
+background_opacity: 1.0
+
+# Mouse bindings
+#
+# Available fields:
+#   - mouse
+#   - action
+#   - mods (optional)
+#
+# Values for `mouse`:
+#   - Middle
+#   - Left
+#   - Right
+#   - Numeric identifier such as `5`
+#
+# All available `mods` and `action` values are documented in the key binding
+# section.
+mouse_bindings:
+  - { mouse: Middle, action: PasteSelection }
+
+mouse:
+  # Click settings
+  #
+  # The `double_click` and `triple_click` settings control the time
+  # alacritty should wait for accepting multiple clicks as one double
+  # or triple click.
+  double_click: { threshold: 300 }
+  triple_click: { threshold: 300 }
+
+  url:
+    # URL launcher
+    #
+    # This program is executed when clicking on a text which is recognized as a URL.
+    # The URL is always added to the command as the last parameter.
+    launcher: xdg-open
+
+    # URL modifiers
+    #
+    # These are the modifiers that need to be held down for opening URLs when clicking
+    # on them. The available modifiers are documented in the key binding section.
+    #modifiers: Control|Shift
+
+selection:
+  semantic_escape_chars: ",│`|:\"' ()[]{}<>"
+
+  # When set to `true`, selected text will be copied to both the primary and
+  # the selection clipboard. Otherwise, it will only be copied to the selection
+  # clipboard.
+  save_to_clipboard: false
+
+dynamic_title: true
+
+hide_cursor_when_typing: false
+
+# Cursor style
+#
+# Values for 'cursor_style':
+#   - Block
+#   - Underline
+#   - Beam
+cursor_style: Block
+
+# If this is `true`, the cursor will be rendered as a hollow box when the
+# window is not focused.
+unfocused_hollow_cursor: true
+
+# Live config reload (changes require restart)
+live_config_reload: true
+
+# Shell
+#
+# You can set `shell.program` to the path of your favorite shell, e.g. `/bin/fish`.
+# Entries in `shell.args` are passed unmodified as arguments to the shell.
+#
+#shell:
+#  program: /bin/bash
+#  args:
+#    - --login
+
+# Key bindings
+#
+# Key bindings are specified as a list of objects. Each binding will specify
+# a key and modifiers required to trigger it, terminal modes where the binding
+# is applicable, and what should be done when the key binding fires. It can
+# either send a byte sequnce to the running application (`chars`), execute
+# a predefined action (`action`) or fork and execute a specified command plus
+# arguments (`command`).
+#
+# Example:
+#   `- { key: V, mods: Command, action: Paste }`
+#
+# Available fields:
+#   - key
+#   - mods (optional)
+#   - chars | action | command (exactly one required)
+#   - mode (optional)
+#
+# Values for `key`:
+#   - `A` -> `Z`
+#   - `F1` -> `F12`
+#   - `Key1` -> `Key0`
+#
+#   A full list with available key codes can be found here:
+#   https://docs.rs/glutin/*/glutin/enum.VirtualKeyCode.html#variants
+#
+#   Instead of using the name of the keys, the `key` field also supports using
+#   the scancode of the desired key. Scancodes have to be specified as a
+#   decimal number.
+#   This command will allow you to display the hex scancodes for certain keys:
+#     `showkey --scancodes`
+#
+# Values for `mods`:
+#   - Command
+#   - Control
+#   - Shift
+#   - Alt
+#
+#   Multiple `mods` can be combined using `|` like this: `mods: Control|Shift`.
+#   Whitespace and capitalization is relevant and must match the example.
+#
+# Values for `chars`:
+#   The `chars` field writes the specified string to the terminal. This makes
+#   it possible to pass escape sequences.
+#   To find escape codes for bindings like `PageUp` ("\x1b[5~"), you can run
+#   the command `showkey -a` outside of tmux.
+#   Note that applications use terminfo to map escape sequences back to
+#   keys. It is therefore required to update the terminfo when
+#   changing an escape sequence.
+#
+# Values for `action`:
+#   - Paste
+#   - PasteSelection
+#   - Copy
+#   - IncreaseFontSize
+#   - DecreaseFontSize
+#   - ResetFontSize
+#   - ScrollPageUp
+#   - ScrollPageDown
+#   - ScrollToTop
+#   - ScrollToBottom
+#   - ClearHistory
+#   - Hide
+#   - Quit
+#
+# Values for `command`:
+#   The `command` field must be a map containing a `program` string and
+#   an `args` array of command line parameter strings.
+#
+#   Example:
+#       `command: { program: "alacritty", args: ["-e", "vttest"] }`
+#
+# Values for `mode`:
+#   - ~AppCursor
+#   - AppCursor
+#   - ~AppKeypad
+#   - AppKeypad
+key_bindings:
+  - { key: V,        mods: Control|Shift,    action: Paste               }
+  - { key: C,        mods: Control|Shift,    action: Copy                }
+  - { key: Paste,                   action: Paste                        }
+  - { key: Copy,                    action: Copy                         }
+  - { key: Q,        mods: Command, action: Quit                         }
+  - { key: W,        mods: Command, action: Quit                         }
+  - { key: Insert,   mods: Shift,   action: PasteSelection               }
+  - { key: Key0,     mods: Control, action: ResetFontSize                }
+  - { key: Equals,   mods: Control, action: IncreaseFontSize             }
+  - { key: Subtract, mods: Control, action: DecreaseFontSize             }
+  - { key: Home,                    chars: "\x1bOH",   mode: AppCursor   }
+  - { key: Home,                    chars: "\x1b[H",   mode: ~AppCursor  }
+  - { key: End,                     chars: "\x1bOF",   mode: AppCursor   }
+  - { key: End,                     chars: "\x1b[F",   mode: ~AppCursor  }
+  - { key: PageUp,   mods: Shift,   chars: "\x1b[5;2~"                   }
+  - { key: PageUp,   mods: Control, chars: "\x1b[5;5~"                   }
+  - { key: PageUp,                  chars: "\x1b[5~"                     }
+  - { key: PageDown, mods: Shift,   chars: "\x1b[6;2~"                   }
+  - { key: PageDown, mods: Control, chars: "\x1b[6;5~"                   }
+  - { key: PageDown,                chars: "\x1b[6~"                     }
+  - { key: Tab,      mods: Shift,   chars: "\x1b[Z"                      }
+  - { key: Back,                    chars: "\x7f"                        }
+  - { key: Back,     mods: Alt,     chars: "\x1b\x7f"                    }
+  - { key: Insert,                  chars: "\x1b[2~"                     }
+  - { key: Delete,                  chars: "\x1b[3~"                     }
+  - { key: Left,     mods: Shift,   chars: "\x1b[1;2D"                   }
+  - { key: Left,     mods: Control, chars: "\x1b[1;5D"                   }
+  - { key: Left,     mods: Alt,     chars: "\x1b[1;3D"                   }
+  - { key: Left,                    chars: "\x1b[D",   mode: ~AppCursor  }
+  - { key: Left,                    chars: "\x1bOD",   mode: AppCursor   }
+  - { key: Right,    mods: Shift,   chars: "\x1b[1;2C"                   }
+  - { key: Right,    mods: Control, chars: "\x1b[1;5C"                   }
+  - { key: Right,    mods: Alt,     chars: "\x1b[1;3C"                   }
+  - { key: Right,                   chars: "\x1b[C",   mode: ~AppCursor  }
+  - { key: Right,                   chars: "\x1bOC",   mode: AppCursor   }
+  - { key: Up,       mods: Shift,   chars: "\x1b[1;2A"                   }
+  - { key: Up,       mods: Control, chars: "\x1b[1;5A"                   }
+  - { key: Up,       mods: Alt,     chars: "\x1b[1;3A"                   }
+  - { key: Up,                      chars: "\x1b[A",   mode: ~AppCursor  }
+  - { key: Up,                      chars: "\x1bOA",   mode: AppCursor   }
+  - { key: Down,     mods: Shift,   chars: "\x1b[1;2B"                   }
+  - { key: Down,     mods: Control, chars: "\x1b[1;5B"                   }
+  - { key: Down,     mods: Alt,     chars: "\x1b[1;3B"                   }
+  - { key: Down,                    chars: "\x1b[B",   mode: ~AppCursor  }
+  - { key: Down,                    chars: "\x1bOB",   mode: AppCursor   }
+  - { key: F1,                      chars: "\x1bOP"                      }
+  - { key: F2,                      chars: "\x1bOQ"                      }
+  - { key: F3,                      chars: "\x1bOR"                      }
+  - { key: F4,                      chars: "\x1bOS"                      }
+  - { key: F5,                      chars: "\x1b[15~"                    }
+  - { key: F6,                      chars: "\x1b[17~"                    }
+  - { key: F7,                      chars: "\x1b[18~"                    }
+  - { key: F8,                      chars: "\x1b[19~"                    }
+  - { key: F9,                      chars: "\x1b[20~"                    }
+  - { key: F10,                     chars: "\x1b[21~"                    }
+  - { key: F11,                     chars: "\x1b[23~"                    }
+  - { key: F12,                     chars: "\x1b[24~"                    }
+  - { key: F1,       mods: Shift,   chars: "\x1b[1;2P"                   }
+  - { key: F2,       mods: Shift,   chars: "\x1b[1;2Q"                   }
+  - { key: F3,       mods: Shift,   chars: "\x1b[1;2R"                   }
+  - { key: F4,       mods: Shift,   chars: "\x1b[1;2S"                   }
+  - { key: F5,       mods: Shift,   chars: "\x1b[15;2~"                  }
+  - { key: F6,       mods: Shift,   chars: "\x1b[17;2~"                  }
+  - { key: F7,       mods: Shift,   chars: "\x1b[18;2~"                  }
+  - { key: F8,       mods: Shift,   chars: "\x1b[19;2~"                  }
+  - { key: F9,       mods: Shift,   chars: "\x1b[20;2~"                  }
+  - { key: F10,      mods: Shift,   chars: "\x1b[21;2~"                  }
+  - { key: F11,      mods: Shift,   chars: "\x1b[23;2~"                  }
+  - { key: F12,      mods: Shift,   chars: "\x1b[24;2~"                  }
+  - { key: F1,       mods: Control, chars: "\x1b[1;5P"                   }
+  - { key: F2,       mods: Control, chars: "\x1b[1;5Q"                   }
+  - { key: F3,       mods: Control, chars: "\x1b[1;5R"                   }
+  - { key: F4,       mods: Control, chars: "\x1b[1;5S"                   }
+  - { key: F5,       mods: Control, chars: "\x1b[15;5~"                  }
+  - { key: F6,       mods: Control, chars: "\x1b[17;5~"                  }
+  - { key: F7,       mods: Control, chars: "\x1b[18;5~"                  }
+  - { key: F8,       mods: Control, chars: "\x1b[19;5~"                  }
+  - { key: F9,       mods: Control, chars: "\x1b[20;5~"                  }
+  - { key: F10,      mods: Control, chars: "\x1b[21;5~"                  }
+  - { key: F11,      mods: Control, chars: "\x1b[23;5~"                  }
+  - { key: F12,      mods: Control, chars: "\x1b[24;5~"                  }
+  - { key: F1,       mods: Alt,     chars: "\x1b[1;6P"                   }
+  - { key: F2,       mods: Alt,     chars: "\x1b[1;6Q"                   }
+  - { key: F3,       mods: Alt,     chars: "\x1b[1;6R"                   }
+  - { key: F4,       mods: Alt,     chars: "\x1b[1;6S"                   }
+  - { key: F5,       mods: Alt,     chars: "\x1b[15;6~"                  }
+  - { key: F6,       mods: Alt,     chars: "\x1b[17;6~"                  }
+  - { key: F7,       mods: Alt,     chars: "\x1b[18;6~"                  }
+  - { key: F8,       mods: Alt,     chars: "\x1b[19;6~"                  }
+  - { key: F9,       mods: Alt,     chars: "\x1b[20;6~"                  }
+  - { key: F10,      mods: Alt,     chars: "\x1b[21;6~"                  }
+  - { key: F11,      mods: Alt,     chars: "\x1b[23;6~"                  }
+  - { key: F12,      mods: Alt,     chars: "\x1b[24;6~"                  }
+  - { key: F1,       mods: Super,   chars: "\x1b[1;3P"                   }
+  - { key: F2,       mods: Super,   chars: "\x1b[1;3Q"                   }
+  - { key: F3,       mods: Super,   chars: "\x1b[1;3R"                   }
+  - { key: F4,       mods: Super,   chars: "\x1b[1;3S"                   }
+  - { key: F5,       mods: Super,   chars: "\x1b[15;3~"                  }
+  - { key: F6,       mods: Super,   chars: "\x1b[17;3~"                  }
+  - { key: F7,       mods: Super,   chars: "\x1b[18;3~"                  }
+  - { key: F8,       mods: Super,   chars: "\x1b[19;3~"                  }
+  - { key: F9,       mods: Super,   chars: "\x1b[20;3~"                  }
+  - { key: F10,      mods: Super,   chars: "\x1b[21;3~"                  }
+  - { key: F11,      mods: Super,   chars: "\x1b[23;3~"                  }
+  - { key: F12,      mods: Super,   chars: "\x1b[24;3~"                  }

install.conf.json

@@ -13,6 +13,7 @@
 		"shell": [
 			["mkdir -p ~/.profile.d/", "Creating local profile dir"],
 			["mkdir -p ~/.local/bin", "Creating local bin dir"],
+			["mkdir -p ~/.config/alacritty", "Creating alacritty-config dir"],
 			["mkdir -p ~/.config/i3", "Creating i3-config dir"],
 			["mkdir -p ~/.config/i3status", "Creating i3-status dir"],
 			["mkdir -p ~/.config/dunst", "Creating dunst dir"],
@@ -26,6 +27,7 @@
 			"~/.dotfiles": "",
 			"~/.bashrc": "bash/bashrc",
 			"~/.bash_profile": "bash/bashrc",
+			"~/.config/alacritty/alacritty.yml": "alacritty/alacritty.yml",
 			"~/.liquidprompt": "bash/liquidprompt",
 			"~/.local/bin/host-is-on": "bin/host-is-on.sh",
 			"~/.local/bin/mdo": "bin/mdo.sh",